Description:
CPE200 is an economic 11ac outdoor CPE with 900Mbps data rate. Comply with IEEE 802.11b/g/n/ac standard, with 12dBi dual polarized high gain antenna, the PTP/PTMP distance is more than 2000 meters.
It support Wireless AP, Wireless Bridge operation mode for PTP/PTMP connections, with slid switch on device, easy to set CPE200's operation mode, no need to access into GUI, avoid the complex setup program; With LED display, simple to set the IP address, channel and view the connected status and signal strength, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.
CPE200 with ABS waterproof, dustproof and sunscreen shell, temperature adaptive also; Meantime, it support 24V passive PoE, ESD protection and surge protection, ideal for outdoor use;
Most Important, CPE200 support watchdog self-detection function, reboot and recover device automatically if some network attack. Besides that, it support cloud remote management and software AC controller, administrator can monitor the working status, upgrade firmware, reboot, timed reboot device through cloud server, recover and maintain device at any time and any location, operator level outdoor PTP/PTMP connection equipment.
Specification: | |
| Hardware: | |
| Chipset | Media Tek: MT7628DAN+MT7613AE |
| DDR2 | 64MB |
| Flash | 8MB |
| Wireless | IEEE 802.11 a / n /ac, 2T2R 900M MIMO Technology |
| Frequency | 5.150GHz~5.850GHz |
| Data Rate | 900Mbps |
| WAN | 1 * 10/100Mbps RJ45 WAN Port |
| LAN | 1 * 10/100Mbps RJ45 LAN Port |
| Buttons | 1 * Slid Switch to change the operation mode, H mean host, AP mode; C mean client, Repeater mode |
| 1 * LED display with F(function) and S(select) buttons, show and set operation mode, channel, IP address, signal strength. | |
| 1 * Reset Button, press 1 second, work with slid switch to change the operation mode; Press 10 seconds, the device will revert to factory default settings. | |
| Antenna | 12dBi Panel Antenna |
| RF Power | ≤ 21dBm |
| PoE Power | POE 24V/0.5A |
| Power consumption | < 8W |
| Waterproof Level | IP65 |
| ESD Protection Standard | Contact Discharge: ±6KV; Air Discharge: ±8KV |
| Surge Protection Standard | Common mode:±2KV; Differential mode:±1KV (Optional: Common mode:±4KV; Differential mode:±2KV) |
| LED Light | Sys(System), WAN, LAN, Wi-Fi |
| Size | 168mm*88mm*47.6mm |
| Working Temperature | -30°C ~ 55°C |
| Storage Temperature | -40°C ~ 70°C |
| Humidity | 5% ~ 95% (Non-condensing) |